table of contents
VGSPLIT(8) | System Manager's Manual | VGSPLIT(8) |
NAME¶
vgsplit — Move physical volumes into a new or existing volume group
SYNOPSIS¶
vgsplit option_args position_args
[ option_args ]
DESCRIPTION¶
vgsplit moves one or more PVs from a source VG (the first VG arg) to a destination VG (the second VG arg). The PV(s) to move are named after the source and destination VGs, or an LV is named, in which case the PVs underlying the LV are moved.
If the destination VG does not exist, a new VG is created (command options can be used to specify properties of the new VG, also see vgcreate(8)).
LVs cannot be split between VGs; each LV must be entirely on the PVs in the source or destination VG.
vgsplit can only move complete PVs. (See pvmove(8) for moving part of a PV.)
USAGE¶
Split a VG by specified PVs.
vgsplit VG VG PV ...
Split a VG by PVs in a specified LV.
vgsplit -n|--name LV VG
VG
Common options for command:
[ -l|--maxlogicalvolumes Number ]
[ -p|--maxphysicalvolumes Number ]
[ -M|--metadatatype lvm2 ]
[ --alloc contiguous|cling|cling_by_tags|normal|anywhere|inherit ]
[ --poolmetadataspare y|n ]
[ --[vg]metadatacopies all|unmanaged|Number ]
Common options for lvm:
[ -h|--help ]
[ -q|--quiet ]
[ -t|--test ]
[ -v|--verbose ]
[ -y|--yes ]
[ --commandprofile String ]
[ --config String ]
[ --devices PV ]
[ --devicesfile String ]
[ --driverloaded y|n ]
[ --journal String ]
[ --lockopt String ]
[ --longhelp ]
[ --nohints ]
[ --nolocking ]
[ --profile String ]
[ --version ]
OPTIONS¶
--alloc
contiguous|cling|cling_by_tags|normal|anywhere|inherit
Determines the allocation policy when a command needs to allocate Physical
Extents (PEs) from the VG. Each VG and LV has an allocation policy which can
be changed with vgchange/lvchange, or overridden on the command line.
normal applies common sense rules such as not placing parallel
stripes on the same PV. inherit applies the VG policy to an LV.
contiguous requires new PEs be placed adjacent to existing PEs.
cling places new PEs on the same PV as existing PEs in the same
stripe of the LV. If there are sufficient PEs for an allocation, but normal
does not use them, anywhere will use them even if it reduces
performance, e.g. by placing two stripes on the same PV. Optional positional
PV args on the command line can also be used to limit which PVs the command
will use for allocation. See lvm(8) for more information about
allocation.
-A|--autobackup y|n
Specifies if metadata should be backed up automatically after a change.
Enabling this is strongly advised! See vgcfgbackup(8) for more
information.
--commandprofile String
The command profile to use for command configuration. See lvm.conf(5)
for more information about profiles.
--config String
Config settings for the command. These override lvm.conf(5) settings.
The String arg uses the same format as lvm.conf(5), or may use
section/field syntax. See lvm.conf(5) for more information about
config.
-d|--debug ...
Set debug level. Repeat from 1 to 6 times to increase the detail of messages
sent to the log file and/or syslog (if configured).
--devices PV
Restricts the devices that are visible and accessible to the command. Devices
not listed will appear to be missing. This option can be repeated, or
accepts a comma separated list of devices. This overrides the devices
file.
--devicesfile String
A file listing devices that LVM should use. The file must exist in
/etc/lvm/devices/ and is managed with the lvmdevices(8)
command. This overrides the lvm.conf(5) devices/devicesfile
and devices/use_devicesfile settings.
--driverloaded y|n
If set to no, the command will not attempt to use device-mapper. For testing
and debugging.
-h|--help
Display help text.
--journal String
Record information in the systemd journal. This information is in addition to
information enabled by the lvm.conf log/journal setting. command: record
information about the command. output: record the default command output.
debug: record full command debugging.
--lockopt String
Used to pass options for special cases to lvmlockd. See lvmlockd(8) for
more information.
--longhelp
Display long help text.
-l|--maxlogicalvolumes Number
Sets the maximum number of LVs allowed in a VG.
-p|--maxphysicalvolumes Number
Sets the maximum number of PVs that can belong to the VG. The value 0 removes
any limitation. For large numbers of PVs, also see options
--pvmetadatacopies, and --vgmetadatacopies for improving performance.
-M|--metadatatype lvm2
Specifies the type of on-disk metadata to use. lvm2 (or just 2)
is the current, standard format. lvm1 (or just 1) is no longer
used.
-n|--name String
Move only PVs used by the named LV.
--nohints
Do not use the hints file to locate devices for PVs. A command may read more
devices to find PVs when hints are not used. The command will still perform
standard hint file invalidation where appropriate.
--nolocking
Disable locking. Use with caution, concurrent commands may produce incorrect
results.
--poolmetadataspare y|n
Enable or disable the automatic creation and management of a spare pool
metadata LV in the VG. A spare metadata LV is reserved space that can be
used when repairing a pool.
--profile String
An alias for --commandprofile or --metadataprofile, depending on the
command.
-q|--quiet ...
Suppress output and log messages. Overrides --debug and --verbose. Repeat once
to also suppress any prompts with answer 'no'.
-t|--test
Run in test mode. Commands will not update metadata. This is implemented by
disabling all metadata writing but nevertheless returning success to the
calling function. This may lead to unusual error messages in multi-stage
operations if a tool relies on reading back metadata it believes has changed
but hasn't.
-v|--verbose ...
Set verbose level. Repeat from 1 to 4 times to increase the detail of messages
sent to stdout and stderr.
--version
Display version information.
--[vg]metadatacopies
all|unmanaged|Number
Number of copies of the VG metadata that are kept. VG metadata is kept in VG
metadata areas on PVs in the VG, i.e. reserved space at the start and/or end
of the PVs. Keeping a copy of the VG metadata on every PV can reduce
performance in VGs containing a large number of PVs. When this number is set
to a non-zero value, LVM will automatically choose PVs on which to store
metadata, using the metadataignore flags on PVs to achieve the specified
number. The number can also be replaced with special string values:
unmanaged causes LVM to not automatically manage the PV
metadataignore flags. all causes LVM to first clear the
metadataignore flags on all PVs, and then to become unmanaged.
-y|--yes
Do not prompt for confirmation interactively but always assume the answer yes.
Use with extreme caution. (For automatic no, see -qq.)
VARIABLES¶
- VG
- Volume Group name. See lvm(8) for valid names.
- PV
- Physical Volume name, a device path under /dev. For commands managing physical extents, a PV positional arg generally accepts a suffix indicating a range (or multiple ranges) of physical extents (PEs). When the first PE is omitted, it defaults to the start of the device, and when the last PE is omitted it defaults to end. Start and end range (inclusive): PV[:PE-PE]... Start and length range (counting from 0): PV[:PE+PE]...
- String
- See the option description for information about the string content.
- Size[UNIT]
- Size is an input number that accepts an optional unit. Input units are always treated as base two values, regardless of capitalization, e.g. 'k' and 'K' both refer to 1024. The default input unit is specified by letter, followed by |UNIT. UNIT represents other possible input units: b|B is bytes, s|S is sectors of 512 bytes, k|K is KiB, m|M is MiB, g|G is GiB, t|T is TiB, p|P is PiB, e|E is EiB. (This should not be confused with the output control --units, where capital letters mean multiple of 1000.)
ENVIRONMENT VARIABLES¶
See lvm(8) for information about environment variables used by lvm. For example, LVM_VG_NAME can generally be substituted for a required VG parameter.
SEE ALSO¶
lvm(8), lvm.conf(5), lvmconfig(8), lvmdevices(8),
pvchange(8), pvck(8), pvcreate(8), pvdisplay(8), pvmove(8), pvremove(8), pvresize(8), pvs(8), pvscan(8),
vgcfgbackup(8), vgcfgrestore(8), vgchange(8), vgck(8), vgcreate(8), vgconvert(8), vgdisplay(8), vgexport(8), vgextend(8), vgimport(8), vgimportclone(8), vgimportdevices(8), vgmerge(8), vgmknodes(8), vgreduce(8), vgremove(8), vgrename(8), vgs(8), vgscan(8), vgsplit(8),
lvcreate(8), lvchange(8), lvconvert(8), lvdisplay(8), lvextend(8), lvreduce(8), lvremove(8), lvrename(8), lvresize(8), lvs(8), lvscan(8),
lvm-fullreport(8), lvm-lvpoll(8), blkdeactivate(8), lvmdump(8),
dmeventd(8), lvmpolld(8), lvmlockd(8), lvmlockctl(8), cmirrord(8), lvmdbusd(8), fsadm(8),
lvmsystemid(7), lvmreport(7), lvmcache(7), lvmraid(7), lvmthin(7), lvmvdo(7), lvmautoactivation(7)
LVM TOOLS 2.03.23(2) (2023-11-21) | Red Hat, Inc. |